User Guide

6
Speaker &
Micr ophone
Kit
Inst allation
Staff Side Inst allation
Fixing points
1. Place the st aff micr ophone on the st aff side of the count er t op ,
ensuring that it does not cause an obstruction and is as close to staff
as
possible.
2. Place the amplifier under the st aff count er , ensuring that it will not
obstruct staff when they are sitting.
3. Mark the four fixing points for the amplifier under the count er .
4. Drill and fix the amplifier in place using the supplied screws.
5. Use the cable management hole in the counter to run the st aff
microphone cable back to the amplifier. If there is not already a
cable management hole, drill one in a suitable location near the rear of
the count er .
6. Install the amplifier’s po w er supply close t o a po w er sock et outlet
using the supplied mounting bracket and fixing screws.