User Guide

6
Installation
Instructions
We recommend that installation is carried out by a qualified
engineer
, adhering to relevant st andar ds.
Check the contents of the box to familiarise yourself with the components.
The st aff micr ophone and amplifier should be inst alled on the st aff side of
the count er . The cust omer spe ak er and micr ophone kits should be
inst alled on the customer side of the count er .
Follow all relevant instructions in the following order:
1. Speaker & Microphone Kit Inst allation.
a. Staff Side Installation (see page 6).
b. Customer Side Installation (see page 7).
2. Hearing Loop Installation (see page 10).
3. Amplifier Setup (see page 11).
4. Using the System (see page 12).
Recommended Tools
A basic toolkit recommended to install the system will include:
• Scr ew driv ers (Flat or Blade
2.5mm and Phillips Head PH2)
• Battery or Mains Drill
• Drillbits: 2mm, 3mm, 5mm and 7mm
• Allen Key Set
• Cable Tacking Gun (10mm)
• Wire Cutt ers/Strippers
There may be a need for a router when
installing the
Flush Mounted Kit
• Pliers
• Tape Measure
• Pencil or Marker Pen
• Torch
• Cable Ties
• Electrical Insulation Tape
• Trunking