User Guide

11
Amplifier Setup
Our amplifier provides full open duplex communication and is comp atible
with all of our speech transfer systems. It features individual displays for
st aff or customer adjustments and individual fault lights for easy fault
diagnosis.
Overview of Front Panel Buttons
Volume In
Increase and decr ease
Volume Out
Increase and decr ease
On/Off
Settings
Engineers Mode
Before entering engineer’s mode, cycle the power. To do this either:
• Switch the power off at the wall socket and back on again
o r ,
• Remove the power connector and re-insert it
To enter engineer’s mode, simultaneously press and release the f ollo wing
buttons within 20 seconds of cycling the power:
• Settings butt on
• Volume In increase butt on
• Volume Out increase butt on
The on/off and settings buttons in engineers mode operate as follows:
Move to the next setup area
Save and exit engineers’ mode
Please note:
• Sav e and exit engineers mode after making any adjustments.
• The amplifier will aut omatically exit engineer’s mode without saving if
no buttons ar e pr essed f or 2 minut es.