User's Manual

3
Installation diagram
 Please check whether the output voltage of the power supply is 12/24V;
 Please confirm that the place where you use the IoT mobile terminal has 4G network
conditions, and connect to the toolkit APK through the 4G network;
 According to the installation position and distance in the figure, power on the device and wait
for two minutes, the device will enter the normal self-checking and self-rotating working
state.
 Whether the device starts normally, you can check the status of the working indicator. The
green light on the left will flash.
 Use a mobile phone or tablet with Toolkit to connect to the 4G AP. After the
connection is successful, two pictures will appear in the basket as shown below after
opening and closing the door. Confirm that the pictures are uploaded to the cloud,
which means the installation operation is successful.