Assembly Instructions

in 6 simple steps
Fig. 10
STEP 5: ADDING ACCESSORIES (see Fig. 10)
• 20 inch long Tapered sills are available for capping wainscot or as a window sill to carry water away from windows.
• Where outlets are present, an outlet stone is available to t over a single gang electrical box that has been installed
by a licensed professional in compliance with local building codes.
• Both accessories come with attachment clips and installed with approved fasteners similar to ats and corners above.
• Tip: For tapered sills below siding, it may be advantageous to partially remove rst course of siding to secure sill to wall.
Fig. 11
STEP 6: FINISHING YOUR INSTALLATION (see Fig. 11)
• Once you’ve reached your nal top row, nish your project with either a Drip Ledge Stone for a wainscot cap or cut
the ClipStone pieces to t in the remaining area, always trying to maintain two points of fastening to the substrate.
• Cut stone as needed to t both horizontally and vertically (see “How to Cut Stone” below).
• If you cut the stone horizontally and therefore remove clip above stone, you will need to use Loctite
®
PL Construction
Adhesive on the bottom edge and 2 side edges. Insert the top piece with adhesive into its proper place and press
rmly into the surrounding pieces.
NOW STEP BACK AND ADMIRE YOUR WORK
ClipStone makes it easy.
For detailed Video Installation Instructions, visit myClipStone.com