Technical Specifications

SPECIFICATION GUIDELINE
SECTION 04700 - Simulated masonry
(Manufactured stone veneer and
t r i m )
1.5 QUALITY ASSURANCE (con’d)
C. Manufacturer Qualifications:
ClipStone…
1. has over 35 years’ experience in producing simulated masonry.
2. provides field service representative.
3. has IAMPO certification.
4. has a 50 year product warranty.
5. is in good standing with the MVMA.
D. Installer Qualifications:
Environmental StoneWorks…
1. provide installers with a minimum of 5 years’ experience installing mechanical adhered masonry.
2. has documented installation procedures and field quality control program.
3. provides OSHA 10/30 Hour trained project management.
4. provides extensive jobsite safety programs including scaffold safety, fall protection and personal protective
equipment.
E. Product Compatibility: Manufacturers of products and systems certify in writing that products are compatible.
F. Pre-Installation Conference:
1. General contractor shall arrange a meeting not less than thirty days prior to starting work.
2. Attendance:
a. General Contractor
b. Architect/Owner’s Representative
c. Installers’ representative.
G. Warranty: Single Source Warranty.
1. ClipStone Fifty (50) year product warranty.
1.6 DELIVERY, STORAGE, AND HANDLING
A. Delivery: Deliver materials in ClipStone original, unopened, undamaged containers with identification
labels intact.
B. Storage and Protection: Store materials to comply with ClipStone written instructions to prevent
deterioration from moisture, temperature or other detrimental effects.