Specifications

Home Networking Solutions6
StarServe Installation Made Easy
STEP 1
Plan Your Installation
There is no substitute for good planning
when it comes to organising digital
services. Make sure the home owner
makes good use of
The Essential Checklist Project Planner.
Q: How many TV outlets do I need?
Q: Do I require the remote
control facility?
Q: How many phone/internet/fax
outlets do you need?
STEP 2
Mounting the Enclosure
Select a suitable location for the
enclosure in the home - this could be
a central location (eg. a linen closet)
or a remote location (eg. a garage).
There is a template included with the
enclosure to ensure simple installation.
The enclosure can be fi xed to the wall
via the studs or can be fi xed in place
with suitable wall anchors.
STEP 3
Inserting Cable in Knockouts
Use a sharp knife to make a suitable incision in the apertures to accommodate
the cables. Thread the relevant cables through the top knockout holes
(allowing suffi cient spare cable at the enclosure).
STEP 4
Terminating Cables
Using a punchdown tool, terminate
all relevant cables to the telephone
distribution unit within the enclosure.
Terminate all coaxial cables with
F-Type connectors.
Terminate all relevant cables to
the required wallplates. Many
combinations of wallplate are
available and they could include any
of the outlets shown to the right.
Analogue and
digital
free to air and
Foxtel/Austar TV
services
RG6 Quadshield
Coax
Telephone,
internet, data
networking, fax
and future digital
distribution
Cat 5e Data