Specifications

page 34
[
StarServe Installers Guide
]
StarServe
TM
Lite
The StarServe Lite VDU provides six
outlets for video distribution. Four
outlets are designated as short and
two as long. The distance recommen-
dation for both short and long is based
on the level of gain that the VDU
provides. Cable lengths in excess of
the recommendations will work, as long
as the incoming signal level (i.e. the
antenna signal) is suitably high.
Video Requirements
Catalogue No. 8051/6VHP
RF Input Max CATV/Antenna Input 20dBmV
(64 channels)
Connector Type 1 x F-Type
RF Output Output Type LONG SHORT
Number of Runs 24
Output Run Distance 45 metres 22 metres
Connector Type 2 x F-Type 4 x F-Type
Output Gain CATV/Ant input to TV output 4dB 1dB
TV output to CATV/Ant input -8dB -12dB
(5-42 MHz reverse channel)
Bandwidth Forward 54-860MHz
Reverse 5-42MHz
Power Supply Model Number 8050P12/500
(Not supplied with Output Current 500mA (300mA minimum)
E-Series variant) Output Voltage 12VDC REGULATED
Input Power 240VAC / 50Hz
Mechanical Details Dimensions 175 x 88 x 23.3mm (LxWxD)
Shipping Weight 1kg
Operating Temperature 0 – 50°C
Operating Humidity 10 – 95% RH
Specifications typical @ 25ºC ± 5ºC