Specifications

[
StarServe Installers Guide
]
page 23
Telephone Hub
8054/6TL
The Telephone Hub for the StarServe Lite allows each of the four
incoming lines to be distributed to six points. These lines are
terminated on a punch down block using a 110-termination tool.
The expansion port (labeled RJ31X) is a special modular
socket that provides line routing for line one, in the same
way as a Mode 3 configuration. With no plug inserted, line
one (Blue Pair) on the left side is connected through the socket
to each of the six line one connections on the right side.
When an eight pin modular connector is inserted in the socket,
this connection is broken locally and needs to be reconnected
via a Mode 3 device such as a security system.
Note order of colours
Keep sheath close to connector
Untwist 13mm max.
110 punch down tool