Specifications
[
StarServe Installers Guide
]
page 15
Infra-red Output Plate, 2031RFT
The Infra-red Output Plate has two emitter sockets, a power
input, and a passthrough F-Type coaxial connecter (one
connection on the front and one on the rear).
The plate is powered by a 12V regulated plug pack, which also powers the Video
Distribution Unit. Power is applied to the coaxial cable from the rear of an F-Type
connector to power the VDU. Hence, the VDU does not require its own plug pack.
No power passes through to the front F-Type connector.
Infra-red Diagram
Modulators
Modulators take a Baseband (Composite) video signal and
audio signal and modulate it onto a Broadband channel. The
channel is user selectable and, once connected to a Video
Distribution Unit, allows that channel to be viewed on any
television connected to a VDU output.
There are three Modulators in the StarServe range:-
Single channel modulator 8051VMP
Each Modulator is supplied with
a 12Vdc regulated plug pack.
Two channel modulator 8052VMPIR
Four channel modulator 8054VMPIR