Specifications
31
LIVING GREEN
4
6
5
2
8
7
3
1
9
L I V I N G R E E N R A T I N G
L I V I N G R E E N R A T I N G
L I V I N G R E E N R A T I N G
L I V I N G R E E N R A T I N G
L I V I N G R E E N R A T I N G
L I V I N G R E E N R A T I N G
L I V I N G R E E N R A T I N G
L I V I N G R E E N R A T I N G
L I V I N G R E E N R A T I N G
1
Sunset Switches
Turn lights on only when you need them!
These switches use a light sensor to turn on once
natural light levels drop below the desired level.
They automatically adjust to seasonal changes,
and some also have inbuilt timers which means
you can achieve even greater effi ciency.
2
C-Thru Dimmers™
Using a 60-watt globe at full illumination for
eight hours per day would consume 175 kWh
per year. A dimmer reduced to half brightness for
half the time would save you 26 kWh per year.
3
Cent-a-meter
Cent-a-meter is an electricity monitor,
with a large LCD display that makes it easy
to check the operating costs and energy
consumption of your electrical appliances.
It displays greenhouse gas emissions,
temperature and humidity with a peak power
limit alarm function. Most importantly, it can
save you money and energy, which in turn
benefi ts our precious environment.
Contribute to environmental conservation
and reduce your energy use by using the
greenhouse gas display mode.
Temperature and humidity display shows the
comfort level. This allows you to turn off electric
heating and cooling when not required.
It will change the way you think about energy
use and conservation during daily activities.
4
Electronic Push-Button Timers
Electronic timers will automatically turn the
load off after a preset period of between 15
seconds and 254 minutes. So when the lights
are left on, the switch will turn them off for you.
The results are real energy and cost savings in
a variety of applications.
5
Ceiling Sweep Fans
With low consumption 65W motors, ceiling
fans consume less electricity than most light
bulbs. With the added benefi ts of air circulation,
cooling, low running cost and energy effi ciency,
Ceiling sweep fans provide an excellent option
for a low-cost cooling, secure alternative for air
movement over opening a window.
6
Exhaust Fans
Exhaust fans now include backdraft
shutters that prevent air escaping into the
ceiling space when the fan is not in use. Clipsal
Airfl ow exhaust fans are available in traditional
round designs or the new square designed
centrifugal fan with whisper quiet operation.
7
Indoor Infrascan Motion Sensor
Motion sensors offer a low cost and
convenient way to ensure lighting and other
loads are only consuming power when a
room is occupied. Units respond to people
movement, and automatically shut down after
a preset time-out period once the room is no
longer in use. Unnecessary use of power is
thereby signifi cantly reduced. Running costs are
correspondingly reduced, as are the resultant
greenhouse gas emissions. A 250-watt security
light left on all night will use 1000 kWh per year.
However, if a Clipsal Infrascan activates even
10 times a night, you will only use 152 kWh
per year.
8
Indoor 360° Infrascan Motion Sensor
Savings can also be achieved by fi tting
an indoor Infrascan or 360° Infrascan in
rooms like walk-in robes, pantries, stairwells,
corridors, laundries and open living areas to
ensure all lighting is switched off when areas
are unoccupied.
9
Outdoor Infrascan Motion Detector
An Outdoor Infrascan helps keep lighting
to a minimum. Using infrared technology, it will
only react to heat movement so that you only
use lights when they are needed, making them
ideal in carports, near entrance doors, or other
outdoor locations.
*These Livingreen Ratings are intended to be used as
a guide only in helping you to make a more informed
choice when choosing Clipsal energy effi cient products.
These ratings are not warranted by Clipsal or any other
manufacturer of the products.