Technical information

TECHNICAL INFORMATION
227
C-Bus Learn Units Quick Programming Guide
Press one key for a single
operated dimmer.
toggle dimmer
Exit Learn mode by pressing any toggle switch on
a Dimmer Output Unit for 2 seconds.
C-Bus2 will now Learn the relationship and will return to
normal operation.
Units and C-Bus Indicators will stop flashing.
1
1
2
2
Press two keys on the
same unit for two key
operated dimmer. The
first key pressed will be
an on/up key and the
second key pressed will
be the off/down button.
OR
on/up
off/down
on/up
off/down
Hold down a key until the
indicator comes on, then
release the key.
The key switch will flash at one second intervals.
Note: Exiting Learn Mode at this point will make the key
a 5 second timer.
Exit Learn Mode by pressing any toggle switch on a Relay
or Dimmer Output Unit for 2 seconds.
C-Bus2 will now Learn the relationship and will return to
normal operation.
Units and C-Bus Indicators will stop flashing.
Continuing to hold down the key will cause the indicator
to double flash every one second.
Each double flasah represents 5 minutes.
For example, releasing the key after 4 double flashes gives
a 20 minute timer.
3. Selecting the Key Input Switches to Control the Chosen Loads
3B. Setting Input Keys as Dimmer Switches
3C. Setting Input Keys as Timer Switches