Specifications

C-Bus Wireless Gateway (433.92 MHz) Installation Instructions
9
A current version of C-Bus Toolkit software may be downloaded from
www.clipsal.com (the Clipsal Integrated Systems web site). It is
recommended that programming by software be performed by trained
C-Bus installers.
4.3 Gateway Identification
A Gateway is a form of C-Bus bridge which links wired and wireless C-Bus
networks. Bridges and Gateways consist of two separate internal sub-
units, one for each network connection. Several Gateways may be used
within a C-Bus installation. When scanning an installation, Gateways
identify themselves with different names, depending on their connection
type, and their position in the network.
Figure 4 shows a diagram of an installation with multiple networks. The
installation includes two wired networks linked through a wireless
network. Two Gateways are used. When scanning the networks using
C-Bus Toolkit software connected via the PC Interface (PCI), four Gateway
sub-units can be seen.
Figure 4 — Identification of Gateways when scanning from a PCI
PCI
Gateway Gateway
GATEWLSN
GATEWLSF
WGATE5N
WGATE5F
Cat-5 wired networkCat-5 wired network
W
ireless network
N A/ L NA/L