Specifications

C-Bus Wireless Gateway (433.92 MHz) Installation Instructions
1.0 Important Note
The use of any software not provided by Clipsal Integrated Systems (CIS) in
conjunction with the installation of this product may void any warranties
applicable to the hardware.
2.0 Description
The C-Bus Wireless Gateway is used to link a single C-Bus wireless network
to a single C-Bus Cat-5 wired network. It is functionally equivalent to a
C-Bus bridge.
Using the Gateway, C-Bus wireless and wired networks can communicate
and interact with each other. Both network types use the same
commands.
The Gateway allows:
• control of a C-Bus wireless network by units on a C-Bus wired
network, or from software such as Schedule Plus and HomeGate
• control of output units and electrical loads in one network type,
from input units (such as switches) in the other network type
• programming of a wireless network using C-Bus Toolkit software.
Gateway
C-Bus CONNECTIONS
Dimmer
CLIPSAL
C-Bus
UNIT
12345 678A/LNA/L N
C-Bus
2
N1
N2
Figure 1 — A Gateway links wired and wireless networks together
5