Specifications

3 of 8

560011BT Professional Bluetooth Audio Receiver Installation Instructions

1.0 Introduction

The Professional Bluetooth Audio Receiver sends audio program from your Bluetooth-enabled

device to an audio ampliﬁer, such as the C-Bus

Multi-Room Audio Matrix Switcher or

Audio Ampliﬁer.

The receiver’s front panel includes bass, treble and output level controls (see Figure 1) and

uses standard audio cables to connect to the audio system.

Figure 1. Professional Bluetooth Audio Receiver front panel details

These installation instructions tell you how to do the following:

• connect the hardware to a power outlet and the audio system

• perform the initial pairing between the receiver and the Bluetooth-enabled device

• disconnect or change the connected device

• reconnect the receiver to a Bluetooth-enabled device.

The Professional Bluetooth Audio Receiver includes the following components:

• Bluetooth Audio Receiver unit for horizontal or vertical mounting

• power supply with cord and mini-USB power connector

• antenna with 90° joint and swivel mount

• audio cable with male 3.5mm stereo to male RCA phono plugs.

Note:

To connect the Bluetooth Audio Receiver to the 560110R MRA 10-Watt Remote Ampliﬁer or

the front panel input on the 560884/2E MRA Matrix Switcher, you will need a male 3.5mm

stereo to male 3.5mm stereo audio cable that is available at electronics stores.