User guide

Overview

Licensing for the C-Bus OPC Server, when activated by a CITECT License, is

based on the number of configured OPC Items. This is referred to as the

point count, and matches the point count of the CITECT license you are

using.

Example: If you have CITECT SCADA with a 500 point count license

installed you can use the C-Bus OPC Server with up to 500 configured

Lighting groups and/or channels of units with at least one alarm or event

configured across any number of C-Bus networks.

When using a dongle with just one of the following CITECT products:

 CITECT SCADA Historian

 Vijeo Reports

 MX4 Historian

 Power Logix Historian

the OPC Server operates as an unlimited points count product. If the

dongle is a combination SCADA/Facilities and Historian/Reports dongle,

the points count is limited to the license level of the SCADA/Facilities

points count.

Multiple licenses

If you have a Clipsal license and a CITECT license installed on the same PC

the C-Bus OPC Server will always recognise and use the Clipsal license in

preference to the CITECT license.

For more information about CITECT, see www.citect.com

http://www.citect.com.