Specifications

C-Bus Network Interface Installation Instructions
1.0 Product Range
5500CN C-Bus Network Interface (with 12 V DC, 500 mA AU plug pack)
E5500CN C-Bus Network Interface (no plug pack included)
2.0 Important Notes
• Both Ethernet and C-Bus connections are made via RJ45 sockets.
Ensure you make each connection to the correct socket.
• The use of any software not provided by Clipsal Integrated Systems
(CIS) in conjunction with the installation of this product may void any
warranty applicable to the hardware.
3.0 Description
The 5500CN Series C-Bus Network Interface (CNI) provides an isolated
communication path between a C-Bus and Ethernet network. When used
in conjunction with an Ethernet connected PC, this allows a C-Bus network
(or multi-network installation) to be:
• programmed with the C-Bus Toolkit software
• monitored and data logged using appropriate software
• controlled by C-Bus automation software such as Schedule Plus or
HomeGate.
The control, monitoring and even programming of C-Bus networks can be
performed at any practical location which has a connection to the Ethernet
network; even off site.
The CNI contains a C-Bus network burden, and is capable of generating a
C-Bus system clock signal. The unit is DIN rail mounted, measuring 4
modules wide (1 module = 17.5 mm).
5