Specifications

C-Bus Network Interface Installation Instructions
Using a Web Browser to Configure the CNI
If your web browser is set to use a proxy server, temporarily change it to
access the Internet/network directly. In the instructions below, substitute
cni_ip_addr for the temporary IP address you are using with the CNI.
1) Type the following into the Address/URL field of your browser, then
press Enter:
http://cni_ip_addr:1
You should get a response explaining that the page cannot be
displayed. If the browser cancels the request and states that the
address is restricted, you must substitute this step with Step 1 of the
Telnet configuration method (on the previous page).
2) Type the following address, then press Enter:
http://cni_ip_addr
A Java applet will load containing the Lantronix Web-Manager. Use
this interface to configure the CNI. Typically, click the Server
Properties button, then enter the permanent IP address you want to
set the CNI to. Once you have configured the settings, you must click
the Update Settings button, in order for the changes to be applied.
If the Web-Manager loads but the menu buttons are non-
responsive, try clicking the "Back to Web-Manager" button at
the top right of the window.
The Lantronix DeviceInstaller Software
DeviceInstaller is a software utility produced by Lantronix. It is suitable for
use on a Windows platform which has the Microsoft .NET framework
installed. DeviceInstaller can be downloaded from the downloads page of
the Clipsal Integrated Systems (CIS) web site (www.clipsal.com/cis) or from
the Lantronix web site (www.lantronix.com).
An application note for using the DeviceInstaller software is provided with
the software at the CIS web site.
14