Instruction manual

C-Bus By Demand 3
Training Manual 27
2.4.3 CreatingNetworks Offline

Tocreateanetworkoffline,whichcontainsmultiplebridges,pleasefollowthestepsbelow.
 1) CreateanewC‐Busprojectandaddanetwork(usingaSerialPCIatCOM1ifpossible).
 2) Onceyou havedone this,selecttheprojectintheProjectManagerandclickon theAdd
Networksbuttononthetoolbar.


Figure 22: The Add Network button.
 3) SpecifytheNetworkName.
 4) SpecifytheNetworkType(inthiscaseBridge–Wired).
 5) SpecifytheTransitNetwork(thepreviousnetworkthatthebridgeisconnectedto).
 6) ChecktheAddBridgetickboxtoaddthebridgetothedatabaseofbothnetworks.
 7) SelectBridg
eTypeforthepartnumber(inthiscase5500NB),andpressok.

Figure 23: Adding network and transit details.