Instruction manual

C-Bus™ Networking 1250SM0905R10/09

C-Bu

s Prod

ucts

Traini

ng C

ours

10/2009

HAZARD CATEGORIES AND SPECIAL SYMBOLS

Read these instructions carefully and look at the equipment to become familiar with the

device before trying to install, operate, service, or maintain it. The following special

messages may appear throughout this bulletin or on the equipment to warn of potential

hazards or to call attention to information that clarifies or simplifies a procedure.

The addition of either symbol to a “Danger” or “Warning” safety label

indicates that an electrical hazard exists which will result in personal

injury if the instructions are not followed.

This is the safety alert symbol. It is used to alert you to potential

personal injury hazards. Obey all safety messages that follow this

symbol to avoid possible injury or death.

Danger indicates an immediately hazardous situation which, if not avoided, will result in death or

serious injury.

Warning indicates a potentially hazardous situation which, if not avoided, can result in death or

serious injury.

Caution indicates a potentially hazardous situation which, if not avoided, can result in minor or

moderate injury.

Caution, used without the safety alert symbol, indicates a potentially hazardous situation which, if not

avoided, can result in property damage or improper operation.

NOTE: Provides additional information to clarify or simplify a procedure.