Specifications
60
OUTPUT UNITS |
4 Channel Analogue Output Range
Learn Enabled
The 4 channel analogue output units are DIN rail mounted units designed to control 0 - 10V and 1 - 10V compatible
dimmable electronic ballasts used in the lighting industry.
These analogue output units feature learn mode, local and remote overrides for on/o control, Channel, C-Bus and unit
status indicators.
Each channel is capable of sourcing or sinking current and the number of ballasts that may be connected to the analogue
output unit is a function of the current drain of that particular ballast.
The analogue control signal typically regulates lighting output over the range of 3 - 100%. The dimming transitions are
smooth and icker free.
The analogue output units are available as passive models only, hence do not source current to the C-Bus network.
TECHNICAL INFORMATION
Catalogue Number L5504AMP
Line Supply Voltage 220-240VAC
Supply Frequency 47-53Hz and 57-63Hz
C-Bus Supply Voltage 15-36VDC @ 0mA
Output Control Range 0-10VDC
Control Range 3 - 100%
Source Current 2.5mA
Sink Current 15mA at Vout = 0V, 8.0mA at Vout = 10V
i.e. I = 15 - (0.7 Vout) mA
Maximum Number of Units on 100
Single C-Bus Network
Status Indicators Channel Status (4), Unit and C-Bus
Warm Up Time 5 seconds
Network Clock Software selectable
Network Burden Software selectable
C-Bus Termination 2 x RJ45 Socket
Load Termination 2 x 1.5mm
2
or 1 x 2.5mm
2
Operating Temperature Range 0˚C to 45˚C
Operating Humidity Range 0 - 95% RH, non-condensing
PRODUCT FEATURES
• Provides 4 channels of 0 - 10V dimming control
• Programmable via the learn mode feature or using the C-Bus
Toolkit Software
• Programmed variables are stored in non-volatile memory
and are retained in case of loss of mains or C-Bus power
• Local and remote on/o control independent of C-Bus
communications
• Programmable power up state following power cycling
• Logic states (max/min) programmable using the C-Bus
Toolkit Software
• Designed to t standard 35mm top hat DIN rail, measures
just 8M in size
• Designed to t into standard electrical switchboards
• CE (European Community) compliant
CATALOGUE NUMBER DESCRIPTION
*L5504AMP 4 Channel Analogue Output, 0-10V, 220/240VAC 50/60Hz
L5504AMP
0-10V Analogue Output
72
65
32
18
15
456885
C-Bus
Unit
C-Bus CONNECTIONS
N A/L
4321
L5504AMP illustrated
*Ask for availability