Specifications
56
OUTPUT UNITS |
4 Channel Relay Driver Range
Learn Enabled
CATALOGUE NUMBER DESCRIPTION
*L5504RDP 4 Channel relay Driver, C-Bus 200mA
L5504RDP
TECHNICAL INFORMATION
Catalogue Number L5504RDP
Line Voltage 220-240VAC
C-Bus Source Current 0mA
Maximum Number of Units on 100
a Single C-Bus Network
The DIN Driver is a 8M DIN rail mounted product designed to operate in conjunction with the relay units, 5000RL20 and
5002RL20. The relay driver is a C-Bus device, learn enabled which supplies control signal (pulse output) to drive the
external relay.
The advantages of the relay driver are, the external relay may be remotely mounted, and if a relay unit fails it may be
replaced without the need to replace the relay drivers.
The relay driver features local overrides so the state of the external relay may be toggled from the unit.
PRODUCT FEATURES
• Units available both with and without a 200mA C-Bus power
supply on-board
• Congured via either the C-Bus Installation Software or via
the Learn Enabled Features
• Local on/o toggle buttons allow individual channels to be
manually overridden at each unit
• Remote on and o facilities permit all channels to be
turned on or o without C-Bus network communication
• Incorporates C-Bus Network Status, Mains Power Status, and
Load Status indicators
• Capable of generating a C-Bus clock signal if enabled
• CE (European Community) compliant
• Designed to t standard 35mm top hat DIN rail, measures
just 8M in size
Latching Relay Driver
143
65
32
18
15
456885
C-Bus
Unit
C-Bus CONNECTIONS
NA/L
1
2
3
4
RB RBRB RB
4321
L5504RDP illustrated
*Ask for availability