Specifications

55
4 Channel Relay Driver Range
Non Learn Mode
The 4 channel relay units are DIN rail mounted units designed to control up to four channels of external latching
relay loads. The relay driver is used in conjunction with the relay modules type 5000RL20 (single channel 20A) and
5002RL20 (dual channel 20A).
These relay driver units feature a remote override for on/o control, C-Bus and unit status indicators. These units are low
cost and do not feature learn mode or local override control.
The relay units are available as passive models only, and do not source current to the C-Bus network.
TECHNICAL INFORMATION
Catalogue Number 5504RDP
Line Supply Voltage 220-240VAC
Supply Frequency 47-53Hz and 57-63Hz
C-Bus Supply Voltage 15-36VDC @ 0mA
Driver Circuit Use only with 5000RL20 or 5002RL20
C-Bus Source Current 0mA
Maximum Number of Units on 100
a Single C-Bus Network
Status Indicators Unit and C-Bus
Network Clock Software selectable
Network Burden Software selectable
C-Bus Termination 2 x RJ45 Socket
Load Termination 2 x 1.5mm or 1 x 2.5mm
Operating Temperature Range 0˚C to 45˚C
Operating Humidity Range 0 - 95% RH, non-condensing
PRODUCT FEATURES
• Capable of controlling up to four channels of external latching
relay loads
• Programmable via the C-Bus Toolkit Software
• Programmed variables are stored in non-volatile memory
and are retained in case of loss of mains or C-Bus power
• Remote on/o control independent of C-Bus communications
• Programmable power up state following power cycling
• Logic states (and/or) programmable using the C-Bus Toolkit
Software
• Designed to t standard 35mm top hat DIN rail, measures
just 8M in size
• Designed to t into standard electrical switchboards
• CE (European Community) compliant
5504RDP
CATALOGUE NUMBER DESCRIPTION
*5504RDP 4 Channel relay Driver
Latching Relay Driver
143
65
32
18
15
456885
C-Bus
Unit
C-Bus CONNECTIONS
NA/L
1
2
3
4
RB RBRB RB
5504RDP illustrated
OUTPUT UNITS |
*Ask for availability