Specifications

41
Network Analyser
*5100NA
CATALOGUE NUMBER DESCRIPTION
*5100NA Network analyser
The network analyser is a eld diagnostic tool designed to measure and report the status of various network parameters.
The network analyser connects to the C-Bus network and is used to measure the network voltage, active clock and
network impedance and determine if these are within acceptable limits for correct operation.
The unit displays the results by illuminating LEDs located on the unit.
Note: The network analyser should be used in conjunction with the C-Bus Calculator software application.
TECHNICAL INFORMATION
Catalogue Numbers 5100NA
C-Bus Supply Voltage 15-36VDC @ 20mA
Status Indicators Power available
Clock not present
Excess voltage
Remove burden
Add burden
Excess cable
C-Bus Termination 2 x Alligator clips
Operating Temperature Range 0˚C to 45˚C
Operating Humidity Range 0 - 95% RH, non-condensing
CAT No.5100NA
Network Analyser
Power Available
Clock Not Present
Excess Voltage
Remove Burden
Add Burden
Excess Cable
Network
Burden
Hold down to add to network
30
118
60
SYSTEM UNITS |
5100NA illustrated
*Ask for availability