Specifications

32
INPUT UNITS |
Indoor Multi-Sensor, 360 Degrees
TECHNICAL INFORMATION
Catalogue Number 5753PEIRL
C-Bus Supply Voltage 15-36VDC @ 18mA
Timer Range Programmable, 1 sec - 18 hrs
Timer Resolution 1 sec
Light Threshold Adjustment Programmable, 1 Lux to full sunlight
Light Regulation 40 - 3000 Lux
Mounting Height 2.4m nominal, (2.0 to 3.2m)
Field of View 360 degrees
Detection Area Programmable, up to 12m x 8.5m
IR Receiver Remote enabled/disable control
Maximum Number of Units on 100
a Single C-Bus Network
Status Indicator Walk test and IR receive LED
Warm Up Time 5 seconds
IP Rating IP44
C-Bus Termination Screw terminals
Operating Temperature Range 0˚C to 45˚C
Operating Humidity Range 0 - 95% RH, non-condensing
PRODUCT FEATURES
• Programmable by learn mode or using the C-Bus Toolkit
Software
• Programmed variables are stored in non-volatile memory
and are retained in case of loss of mains or C-Bus power
• Programmable walk test LED for commissioning
• User adjustable light level threshold, from low light (1 Lux)
to full sunlight
• Dual element detectors to minimise false triggering
• Optical bandpass lter minimises unwanted heat sources
from triggering the circuitry
• CE (European Community) compliant
CATALOGUE NUMBER DESCRIPTION
5753PEIRL PIR light level IR combination sensor
5753PEIRL
The indoor occupancy sensors are surface mounted, input units used to detect movement by sensing natural thermal
radiation emitted from any moving body. When movement is detected, the unit issues commands over the C-Bus network
to control C-Bus output devices. In addition, the unit features a light level sensor to automatically switch lighting on,
under low light conditions.
The sensor has a detection eld that covers an area up to 8.5 metres from the unit, with a eld of view of 90 degrees.
The unit features a ‘lens less’ design with 12 overlapping zones forming a continuous detection eld, therefore resulting
in uniform sensitivity across the whole of the detection eld, with no dead zones. This feature allows the sensor to be
ceiling or wall mounted.
The sensor features learn mode, which permits the unit to be programmed without the need for a PC connected to the system.
The sensor features an environmental rating of IP44 and is suitable for indoor applications. The sensor is designed for
surface mount applications, and located in the corner of the room where detection is required.
Warranty Void
If Removed
47 5036
72
Unit Address Group Addresses
Network
1 2 3 4 5 6
MOD. STATE
1036318
88
15
103
5753PEIRL illustrated