Specifications

27
INPUT UNITS |
Bus Coupler
Learn Enabled
The bus couplers provide non-isolated inputs for voltage free, mechanical switches to interface to the C-Bus network. The
bus couplers support momentary and latching switch types.
The bus coupler units may be programmed with the same functions as a key input, including toggle, timer, dimmer and
scene control.
The four channel bus coupler provides support for 4 switches which are programmed to report the state of the switch.
The bus couplers are small in size and volume and are designed to t into any wallbox.
PRODUCT FEATURES
• Provides 4 channels of input, compatible with voltage
free mechanical switches
• Programmable by learn mode or using the C-Bus
conguration software
• Programmed variables are stored in non-volatile memory
and are retained in case of loss of mains or C-Bus power
• Small in size and volume, designed to t into any wallbox
• CE (European Community) compliant
5104BCLWE
CATALOGUE NUMBER DESCRIPTION
5104BCLWE Bus coupler auxiliary input
Bus Coupler
5104BCL
C
1
4C3C2C1
234
55
49
18
TECHNICAL INFORMATION
Catalogue Number 5104BCL
C-Bus Supply Voltage 15-36VDC @ 18mA
Maximum Distance between 1m
Switch and Bus Coupler
Number of Channels 4
LED Drive Output 0mA
Maximum Number of Units on 100
a Single C-Bus Network
Status Indicators Channel (4)
Warm Up Time 5 seconds
C-Bus Termination Screw terminals
Load Termination Push Terminals, 1 x 1.5mm2
Operating Temperature 0˚C to 45˚C
Operating Humidity 0 - 95% RH, non condensing
5104BCLWE illustrated