Specifications

20 of 36

50x0CTC3 Series C-Touch Colour Touch Screen Installation Instructions

6.0 Using the C-Touch Colour Utility

The C-Touch Colour Transfer Utility transfers a software project to the touch screen.

The utility is included with PICED software that is available from the Downloads

section of the CIS web site: http://www.clipsal.com/cis.

This section takes you through the process of installing a project on the C-Touch

touch screen using a direct Ethernet connection. It is also possible to install projects

to multiple C-Touch touch screen units via a common DHCP network, or a network

where each touch screen has been conﬁgured with a unique static IP Address.

1. After the touch screen has been installed and switched on, the default screen

appears (see Figure 17). You must congure the unit with an IP address and a

customised project ﬁle before the touch screen is ready for use.

Figure 17. The initial screen of an unconﬁgured colour touch screen