User`s guide
© Copyright 2003 Clipsal Integrated Systems Pty Ltd. Page 22
Intelligent Building Series C-Touch User’s Guide
Intelligent Building Series C-Touch User’s Guide
© Copyright 2003 Clipsal Integrated Systems Pty Ltd. Page 23
15.0 Product Specications
Parameter Description
Catalogue Number 5000CT Series C-Touch Control Unit
C-Bus Supply Voltage 15-36V DC @ 40mA required for normal
operation. Does not provide current to
the C-Bus Network
AC Input Impedance 50kΩ @ 1 kHz
Electrical Isolation 3.75 kV RMS from C-Bus to mains
(provided externally to 5000CT)
Control Functions Load switching and dimming
Scenes
Schedules
Maximum number of controlled loads 255 Group Addresses on each
of 10 applications
Status indicators User congurable
Maximum Number of C-Touch Units
on a single C-Bus Network
50
Night-light Option (Allows permanent LED illumination at
low brightness level)
Warm Up Time 1 minute
Network Clock Software selectable
C-Bus Connection 2 X Loop-in/Loop-out Removable
Terminal blocks provided 0.2-15mm
2
(24-16 AWG) see section 6 in the
installation instructions for the pin out)
Dimensions 152 x 115 x 42mm (L x W x H)
Weight 365g
Mounting Centres 124mm
Operating Temperature Range 10-30 °C
Operating Humidity Range 10-95% R.H.
Colour Stainless Steel, Brass, Powdercoat