Specifications
Intelligent Building Series C-Touch Programming Reference
12.4 What’s New
The C-Touch Configuration Software has many new features introduced with
each new release. The What’s New dialogue is designed to introduce a few of
these ideas to you.
The What’s New dialogue box will be displayed when you start the software.
You can also display it by selecting the Help | What’s New item in the Menu.
The Show on Startup check-box allows you to set whether you want it displayed
each time the software starts.
13.0 Documenting the Installation
The designer of the C-Touch project must capture the requirements of the user before
commencing the actual creation of a C-Touch project. Some useful pro-forma forms are
shown in this section.
To use the scheduling pro-forma fill in the area to be controlled and draw a line from the
start to finish time required. This list is used in the Scheduling editor accessed via the
Edit | Schedule | Edit Schedule menu item.
The scene pro-forma has two parts, the triggering and the actions part. Any scene can
be triggered by a group address and level. The actions section specifies what is to be
turned on, to what level and how fast.
© Copyright 2002 Clipsal Integrated Systems Pty Ltd Page 74