Specifications

Intelligent Building Series C-Touch Programming Reference

11.2 Scene Design

The scenes in a project may be used to create a mood by ramping lights up or

down at predetermined rates. Example scenes were shown in Section 6.8

previously. Another use for scenes is to enable several loads to be controlled at

once for the purposes of scheduling. The scenes shown in the example below

are used in conjunction with the schedule section which follows. Some example

scenes which could be implemented by C-Touch are

11.3 Example Scenes

Some example scenes which could be implemented by C-Touch are described

in this section. In the course of day to day living, some activities call for a