Specifications

Intelligent Building Series C-Touch Programming Reference

8.0 Downloading to C-Touch

Once the project is complete, all pages and links are in place and they have been tested

using the simulation mode the project should be downloaded to the C-Touch unit for

final checks and commissioning.

8.1 Downloading

There are two types of data that can be downloaded to the C-Touch Unit. The

first (and most common) requirement is to download the user configuration data

(a project).

The second (less frequent) requirement is to download upgraded firmware into

the unit to add new features as the firmware becomes available from Clipsal

Integrated Systems.

Before downloading a project, a summary of the project can be created by

selecting Transfer | Prepare Download File. This is completely optional but

may be useful in preparing a download file for later use or for e-mailing to

someone else. The utility checks the project against design rules for C-Touch

projects and if any discrepancies are found this is first reported with the

following dialogue box:

This creates a file in the project directory called “errors.txt. Upon entering Y

the file will be opened for inspection by the default text editor (such as

Notepad). When this file is closed, the preparation of the resources file may be

aborted by means of another dialogue box: