Specifications

Intelligent Building Series C-Touch Programming Reference

The option to save the data as CSV values is for ease of import into a

spreadsheet program if required.

7.9.5 Connecting to C-Bus

The C-Touch Configuration Software can control C-Bus if it is connected.

This is used mainly for testing purposes, but can also be used for

establishing the current group address levels when setting scenes.

The unit is connected to C-Bus with the Options | Connect to C-Bus

menu selection. The connection will take place according to the settings

provided on the Program Options menu selection as described in section

5.1 previously.

The software will take several seconds to read the current state of the C-

Bus network. Once connected, all C-Bus buttons on the software will show

and control the state of C-Bus Group Addresses.

7.9.6 Resources

Each part of a project uses memory in the C-Touch unit. Before a project

is downloaded it should be checked to see if it would fit in the C-Touch

memory. The section on memory management contains details.

7.9.7 Remote Control

The C-Touch unit supports the use of a remote control. This feature is

highly recommended for important pages and for the main navigation

pages in the project.

Once the user is familiar with the various pages and how they work the

remote control can be used to control C-Bus from any place in the room.