Specifications

Intelligent Building Series C-Touch Programming Reference

7.7 Scenes

A scene is used to control several loads at once in a coordinated action. Since

each scene may be associated with one or more activities, the C-Touch

software contains a scene editor to create scenes and a scene manager to

manipulate scenes created with the scene editor. The sections which follow

describe these two utilities, which are fully integrated into the C-Touch

configuration software.

7.7.1 Scene Manager

The Scene Manager allows the user to see all scenes in a project. It also

allows you to add, copy, edit and delete scenes.

The Scene Manager dialogue box is invoked by selecting

Edit | Scenes | Edit Scenes or the toolbar button (shown below.)

Once invoked the following dialogue is displayed:

A new scene is created with the Add button. When pressed, the Scene

Editor dialogue box appears.

A scene is deleted by selecting the required scene from the list and

clicking the Delete button.

A scene is edited by selecting the required scene from the list and clicking

on the Edit button or double clicking on the required scene.

To copy a Scene, select the required Scene then click the Duplicate

button. The duplicate scene will appear in the list.

When the Scene Manager is closed with the OK button, checks are made

to ensure that if scenes trigger each other, there are no circular