Specifications

Intelligent Building Series C-Touch Programming Reference

• If the Schedule is to be executed on particular days of the month,

then the required days are selected. There are buttons at the bottom

to allow:

• all days to be selected quickly,

• all days to be cleared quickly,

• the first week of the month etc. to be selected.

• If the Schedule is to be executed in particular months, then the

required months are selected. There are buttons at the bottom to

allow:

• all months to be selected quickly

• all months to be cleared quickly.

• If the Schedule is to be executed in a particular year, the Any Year

check box is deselected and the year required is selected from the

scroll box.

• The Days, Months and Years can be combined in any combination.

So for example, if the Schedule is to occur on the first Tuesday of

every month, Tuesday is selected along with the first 7 days of the

month. (This ensures that the Tuesday in question is contained within

those first seven days).

Event

An event is an action that will occur at a scheduled time and day. There

are three choices: setting a Group to a particular level, pulsing a group or

setting a scene.

The Ramp Group button can set a group to be ramped. To set a ramp

operation, the required group, level and ramp rate must be selected.

The Pulse Group button can set a group to be pulsed (ie. set to a

particular level for a certain time). To set a pulse operation, the required

group, level, ramp rate, duration and return level (the level returned to at

the termination of the pulse) must be selected.

The Set Scene button can set a scene. To set a scene correctly the

required scene must be selected from the list.

When all changes are complete, the OK button finishes the programming.

The Cancel button causes an exit without making any changes to the

Schedule.

7.6.3 Schedule Monitor

The Schedule Monitor allows the user to see all schedules in a project,

and to see which are active.

The Schedule Monitor dialogue is invoked by selecting

Edit | Schedule | Schedule Monitor.

The Schedule Monitor is shown below. One button runs the scheduler (the

icon with the clock), and the other runs the Schedule Manager (the icon

with the notepad).