Specifications

Intelligent Building Series C-Touch Programming Reference

1.0 Product Range

The products included in this range are:

BS5000CT

C-Bus Touchscreen, Monochrome, Stainless Steel

BB5000CT

C-Bus Touchscreen, Monochrome, Brass

BP5000CT

C-Bus Touchscreen, Monochrome, Powder Coated Steel

SC5000CT

C-Bus Touchscreen, Monochrome, Slim Line

5035TX

C-Touch (or Scene Master) hand held infrared remote

control included with all of above

2.0 Description

The C-Touch unit is a flexible and powerful controller and scheduler for C-Bus systems

which has infra red remote control capabilities.

C-Touch is a touch sensitive screen with a black and white display, which can be

mounted in the wall of your home or building and can be connected to the C-Bus home

automation system. It can provide a central point of control and scheduling of services

throughout the home.

The C-Touch unit can display a series of “pages” which contain touch sensitive controls

associated with various loads throughout the C-Bus network. These pages may be re-

configured by means of a personal computer running the C-Touch configuration

software.

Through the C-Touch unit the user may set up “scenes” with multiple loads ramping to

their respective target levels together to set a particular mood at the press of a soft

button. The C-Touch unit can also control loads according to a schedule.

The appearance of every C-Touch setup will be unique, so your

C-Touch display may not look like the examples in this guide.

This software is intended to work with C-Touch firmware version 0.6 to 1.9.9. This range

may also be seen in the “Help | About” box.

3.0 Menu Notation

The menu selections in this document will follow a simple menu description notation. If

the user is using the C-Touch Configuration software and chooses, for example, the

menu selection Edit then from the resulting menu chooses Select and then from that

menu chooses Select All then this process will be described as

Edit | Select | Select All as a shorthand description of this operation. Certain menu

items offer several options, any one of which may be selected. In this case we can

specify a range with square brackets and ellipses. For example, the width of a tick mark

can vary from 1 to 5, this can be denoted by [1..5].