Specifications

Intelligent Building Series C-Touch Programming Reference

7.5.4 Painting Format

Once the format of a Component has been set to achieve some kind of

visual effect, the format itself may be copied to other similar Components

in the project. This is called “Painting Format”.

The Painting Format operation is performed by first selecting and copying

a component with the desired formatting. Then the target component is

selected and either the E

dit | Paint Format or the paint format toolbar

button is chosen (shown below.)

7.5.5 Moving

A component can be moved by selecting the component and then

dragging it to the new location.

If a number of components are selected one of the components may be

dragged and the entire group will move. The group can then be positioned

as desired.

7.5.6 Resizing

The size of Components can be set in several ways. Some components

can have their size set as they are placed. When placing these

components, click on the screen area where you want one corner to be,

drag to where you want the other corner to be and release the mouse

button.

After a component has been placed, it may be selected and the size

adjusted by placing the cursor over one of the selection dots. The cursor

will change to show which way the size will be adjusted (left-right, up-down

or diagonally). When the mouse moves, the dot will move and the object

will resize in response. The mouse button is released when the right size

is achieved.

The size of a component can also be precisely adjusted by selecting the

component and choosing Edit | Component Properties then selecting

the Visual Properties Tab. This tab in turn contains several sub-tabs, one

of which is the Position Tab. This tab contains four fields for the Left, Top,

Width and Height of the components. Entering a numeric value has the

desired effect on the component.