Specifications

Intelligent Building Series C-Touch Programming Reference

A special function is added by the following:

• Select the component

• double click the component OR choose Edit | Button Properties

from the menu

• Select the Link tab page

• Select the desired special function from the list

7.4.3 Infrared Remote Control

The C-Touch unit can be operated by an Infrared remote control. This may

be the one that comes with the unit, or any remote control that uses NEC

codes.

An image of the remote control unit can be displayed in the C-Touch

configuration software by selecting the O

ptions | Show Remote menu

item. The image of the remote may be used just as a real one is by

clicking on the keys. When this is done the project will execute the action

set up for that key. The image of the remote appears as below.

A remote control key can be associated with a Component on the C-Touch

unit. When the remote control key is pressed, the C-Touch unit will act as

if the screen area has been pressed in the centre of that Component.