Specifications

Intelligent Building Series C-Touch Programming Reference

7.2 Using Pages

The basic building block of a project is a page, which is populated with various

controls and objects. It is possible to work with the project at the page level

without consideration of what is on the pages. The sections below describe

various options for working at the page level.

7.2.1 New Page

A new page is added as follows:

• The New Page speed button is clicked OR E

dit | Page | New Page

is chosen

• the name of the new page is entered followed by

• O

7.2.2 Add / Import Page

A saved page (or pages) with attendant components may be added to the

current project by means of the following sequence:

• either E

dit | Page | Add Page(s) or File | Import Page(s) is

selected

• the desired file is selected followed by

• O

• if the name of the page has already been used, a new name will be

requested.

7.2.3 Delete Page

The currently displayed page may be deleted thus:

• E

dit | Page | Delete Page

7.2.4 Duplicate Page

A copy of the currently displayed page may be made,

• E

dit | Page | Duplicate Page , is selected

• then the page is given a name followed by

• O

7.2.5 Page Properties

The properties of the currently displayed page may be changed by either:

• Selecting the E

dit | Page | Page Properties item ; or

• Double clicking on the page where there are no components

Following this a dialogue box will appear which will enable the user to

change:

• The name of the page

• The password for the page

If a password has been set for a page, then when the user tries to select

that page in the C-Touch unit, they will have to enter the password. This

will not happen in the C-Touch configuration software unless Simulation

Mode is selected.