Specifications

Intelligent Building Series C-Touch Programming Reference

Installer Information

The installer information involves details of the installer such as the:

• Name

• Company

• Address

• City

• State

• Postcode

• Country

• Phone

• Mobile

• Fax

• E-mail

• Web Site

Options

The options tab includes three main areas, Start Up Details, Time-out

Details and Key Press Sounds. In addition a night light can be enabled or

disabled with a tick box.

Start Up Details

The Start Up Details section allows you to set the Start Up Page, the

Installer Details and Installer Contact Details to be displayed on C-Touch

on power up.

Time-out Details

A particular page may need to be displayed after a time-out period has

expired. The page and the duration of the time-out period can be set in the

Project Details dialogue box.

When the time-out period expires, the backlight will extinguish and the

time-out page will be displayed. If the room is dark, a different time-out

page will normally be displayed. This “Dark Time-Out Page” has no

buttons on it. When it is touched, it turns on the backlight, and displays the

regular time-out page. The intention is to avoid the possibility that when

the C-Touch is not visible, a load will be switched on inadvertently.

Key Press Sounds

The Key Press sounds can be of three main types, pitches and durations.

The types of Beep are No Beep, Quiet Beep and Loud Beep. The Pitches

are low, medium or high and the Durations are short, medium and long.

The three parameters can be used in any combination.