Specifications

Intelligent Building Series C-Touch Programming Reference

Screen Orientation

The options for screen orientation either a normal or inverted orientation.

The design of the touch screen display provides superior viewing contrast

within a range of angles as shown below.

If the unit is to be mounted at eye level or above then the normal

orientation, denoted in the orientation drop down box as “IR Window at

Top” is best.

If the unit is to be mounted at eye level or below then the inverted

orientation, denoted by “IR Window at Bottom” is the correct choice.

Note: If the IR Window at Bottom orientation is used the

screen must be installed in an upside down orientation

with the Infrared sensor at the bottom.

Project Information

This tab allows the following to be set:

• Project details (name, location etc)

• C-Bus Project to be used (for tags)

• Network that C-Touch will be installed on. This is only used if

commands are being sent from one network to another. In such a

case, C-Touch needs to have path information to the other network.

• C-Bus Unit Address. This is used when programming C-Touch via C-

Bus.