Specifications

Intelligent Building Series C-Touch Programming Reference

Examples:

To start the Guide Example used in this Programmer’s Guide and open a

connection to the C-Bus network on COM1 the following command line would

be used:

C:\Clipsal\C-Touch\CTouch.exe "C:\Clipsal\C-Touch\Projects\Examples

\Example 13 – Guide Example\GuideExample.xml" /COM1

This may be included in the shortcut for the program in the start menu.

Another example, using C-Gate running on IP address 1.2.3.4 would be:

C:\Touchscreen\CTouch.exe C:\Touchscreen\Data\MyHouse.XML

/cgate=1.2.3.4

will load the file MyHouse.XML at start-up and connect via C-Gate at IP

address 1.2.3.4.