Specifications

Intelligent Building Series C-Touch Programming Reference

The syntax is as follows:

[path]\CTouch.exe [filename] [/cgate | /cgate=IP Address | /com1 | /com2 |

/com3 | /com4 ]

Where:

• Path is the path to the C-Touch executable

• Filename is the name of a file to be loaded (if there are spaces in the

name use quotes as in the example below)

• /cgate, /cgate=IP Address, /com1, /com2, /com3 & /com4 select whether

communications are to be opened with a local C-Gate, remote C-Gate (at

IP Address), COM1, COM2, COM3 or COM4 respectively (only one can

be selected).