Specifications

C-Touch Colour Touch Screen
3.3 Infrared Remote Control
The C-Touch Colour is supplied with an Infrared Remote Control, which can
be used to trigger scenes, switch loads, and adjust lighting levels. The
remote control functionality is incorporated into a software project. The
available functions depend on how the C-Touch Colour is programmed. If
multiple C-Touch Colour units are installed, the same remote control can
talk to each of them.
Figure 2 – The Infrared Remote Control
4.0 Definitions
Term Definition
load An electrical device (such as a light) connected to a
C-Bus output unit (such as a dimmer).
scene A series of actions across multiple outputs, triggered by
a single button. For example, on arrival home you could
use a scene to switch on lights in the hallway, kitchen
and lounge, and switch on a heater.
schedule A sequence of events to occur at particular instances in
the future.
backlight The light behind the LCD screen providing visibility in
varying lighting conditions.
8