Specifications
C-Touch Colour Touch Screen
• Changes or modifications not expressly approved by Clipsal Integrated
Systems could void the user’s authority to operate the equipment
(under FCC rules).
• To comply with EMC regulations the included ferrite filters must be
fitted to any audio, video and IR cables connected to the C-Touch
Colour unit. Refer to sections 7.3 and 7.4 on Pages 22 and 23.
• Cabling for this product should be performed by a suitably qualified
person, in accordance with the laws and requirements of the state or
country of installation.
• Do not over tighten the screws when securing the C-Touch Colour unit
to the wall. Doing so may distort the casing, making attachment of the
facia more difficult.
3.0 Description
The C-Touch Colour Touch Screen (C-Touch Colour) allows sophisticated
control of an entire C-Bus system from one location.
Using appropriate software, the unit can be configured to look and
operate in a manner convenient to the user. Refer to Page 26 for further
details.
3.1 Packing List
The items
*
included with the C-Touch Colour package are shown in
. They are: Figure 1
• C-Touch Colour Touch Screen (LCD covered by protective film)
• programming lead (2 metre red crossover network cable)
• RJ45 cable joiner
• 2 × ferrite filters
• cleaning cloth
• Installation Instructions (this booklet)
• User’s Guide
• Stylus
• 4 × mounting screws (finish to suit touch screen style).
• 5035TX Infrared Remote Control.
*
Subject to change without notice
6