Specifications

Installation Instructions
35
Using the C-Touch Colour on a network follows the same
principles. You may need assistance from the network
administrator.
13.1 The Reset Button
In the event that the C-Touch Colour software becomes unresponsive, you
can restart the unit by pressing the reset button.
The reset button is located to the right of the display, beneath the facia (as
shown in ). Instructions on removing the facia are provided on
Page 19 (Section 6.4).
Figure 31
facia release latc
h
reset button
IR sensor
light sensor
Figure 31 – The reset button is located underneath the facia