Specifications

C-Touch Colour Touch Screen
19) Click the Control tab to select the Control page shown in Figure 29.
From here you can stop and start the C-Touch Colour’s project (in
HomeGate), enable logging, set the time and change the name that
identifies the C-Touch Colour over an Ethernet connection.
Figure 29 – The Control page in the Transfer Utility software
20) Ensure that the time on your PC is set correctly. If not, change the
time. This can be accomplished by double clicking the clock on the
bottom right of the screen (if present).
21) Click the “Set Time” button in the Transfer Utility software. This will set
the time on the C-Touch Colour to the same time as your PC. No
feedback is given to indicate the time on the C-Touch Colour has been
set.
22) Type a name in the field that will identify the C-Touch Colour when
controlled via Ethernet. Click the “Rename C-Touch Colour” button.
Click Yes when asked to confirm the change (Figure 30). Renaming
the unit is especially useful if multiple C-Touch Colour units are to be
connected to a common Ethernet network.
Figure 30 – Confirming a name change
34