Specifications

C-Touch Colour Touch Screen

6.3 Wall Box

The C-Touch Colour Wall Box (catalogue number 5000CTCWB) allows the

C-Touch Colour unit to be mounted within a solid wall construction such as

brick or stone. It provides increased RF shielding compared to the Nail

Bracket. The wall box (illustrated in ) may also be used to mount a

C-Touch Colour unit in timber or metal framed stud walls.

Figure 9

Figure 9 – A C-Touch Colour Wall Box

To mount the C-Touch Colour using the wall box:

1) Prepare a hole in the wall or place the wall box against a beam of

the wall frame (in stud walls).

2) Fix the wall box into the wall or frame, in an appropriate manner.

3) Feed the cables through to the wall box. It is recommended that

conduit be used. Refer to . The number and positioning

of cables will vary depending on the particular installation.

Possible cables are listed in Table 1.

Figure 10

4) Hold the C-Touch Colour unit up to the wall box and plug the

cables into the connectors.

5) Insert the unit into the wall box, lining the mounting holes up with

those in the wall box. Fix the C-Touch Colour to the wall box using

the four screws provided. Do not over tighten. Ensure cables are

clear of mounting screws.