Specifications

Installation Instructions
6.2 Nail Bracket
The C-Touch Colour Nail Bracket (catalogue number 5000CTCNA) provides
a convenient means of mounting the C-Touch Colour unit. The nail bracket
(illustrated in ) is used where is it practical to nail or screw the
bracket into a wall frame.
Figure 7
Figure 7 – A C-Touch Colour Nail Bracket
To mount the C-Touch Colour using the nail bracket:
1) Place the bracket against a beam of the wall frame.
2) Nail the bracket into the frame. Alternatively mark and drill the
holes, then screw the bracket into the frame.
3) Feed the cables through to the nail bracket. The use of conduit is
recommended. Refer to . The number and positioning of
cables will vary depending on the particular installation. Possible
cables are listed in Table 1.
Figure 8
4) Hold the C-Touch Colour unit up to the nail bracket and plug the
cables into the connectors.
5) Insert the unit into the nail bracket, lining the mounting holes up
with those in the bracket. Fix the C-Touch Colour to the nail
bracket using the four screws provided. Do not over tighten.
13