User`s guide

9 of 40
© Clipsal Australia Pty Ltd
5000CTC2 Series C-Touch Colour Touchscreen Installation Instructions
6.0 Mounting Instruction
There are three options for mounting the touchscreen:
• In plasterboard walls using a plasterboard bracket
• In stud walls (such as timber frame internal walls) using a nail bracket or
• In solid walls (such as brick or stone) or stud walls using a wall box.
6.1 Plasterboard Bracket
The C-Touch Colour Plasterboard Bracket, catalogue number 5000CTRM,
provides a convenient means of mounting a 5000CTC2 series touchscreen in
a plasterboard wall.
310 x 310 x 65mm
cavity clearance is
required to insert and
rotate the bracket
208 x 162mm cut out
NOTE
Figure 4. Ensure sufficient clearance
When planning to use the 5000CTRM Plasterboard Bracket, ensure that
sufficient clearance is available inside the wall cavity. See Figure 5. You
must insert the bracket vertically and then rotate it 90 degrees.