User`s guide

7 of 40
© Clipsal Australia Pty Ltd
5000CTC2 Series C-Touch Colour Touchscreen Installation Instructions
5.0 Installation Procedure
5.1 Location
It is important to select the right location to install the touchscreen.
Some considerations:
• The unit has a typical viewing angle of 70° to the left, right and down, and 40°
up (see Figure 2). Take this into account when choosing the mounting height.
• Provide easy access to the unit for switching lights and selecting scenes.
• Keep the C-Touch touchscreen free of water, humidity, direct sunlight and dust.
• Allow adequate ventilation.
• Do not cover the unit.
• Avoid obstruction to the reception of infrared signals from a remote control.
• The touchscreen is designed for indoor use only.
• Do not mount the touchscreen opposite windows or other sources of bright light,
as the reflections make viewing difficult.
• The unit must be mounted vertically in a landscape orientation (to maximise
heat dissipation).
Figure 2. Consider the C-Touch Colour’s viewing angle when mounting the unit
Warm air radiates from the vents at the top of the unit. This may cause
discolouration of some surfaces over time.
No wet
hands
No
coverage
No direct
sunshine
No dustNo cleaner
spray